-
20
Sep, 2021
Basic Introduction Of Manifold
The manifold refers to the collection, flow adjustment and control of the supply and return water, which can manually or automatically remove the gas collection in this part.
-
19
Sep, 2021
Precautions For Installation Of Electric Valves
Operating torque: Operating torque is the most important parameter for selecting valve electric devices. The output torque of the electric device should be 1.2 to 1.5 times the maximum torque of th...
-
18
Sep, 2021
Principle Of Operation Of Electric Valve
Electric valves usually consist of electric actuators and valves. The electric valve uses electric energy as power to drive the valve through an electric actuator to realize the opening and closing...
-
17
Sep, 2021
Basic Introduction Of Electric Valve
The electric valve has a larger operating force than ordinary valves. The switching speed of the electric valve can be adjusted. The structure is simple and easy to maintain.
-
16
Sep, 2021
Comprehensive and effective management of customer information resources and market competition information;
-
15
Sep, 2021
The Working Principle Of The Actuator
In the gear stage, the engine speed can be transmitted to the output rod through two sets of gears.
-
14
Sep, 2021
According to the driving energy used, the actuators are divided into three types: pneumatic, electric and hydraulic actuators.
-
13
Sep, 2021
In the process control system, the actuator is composed of two parts: an executive mechanism and an automatic adjustment mechanism.
-
12
Sep, 2021
The actuator is a combination of the actuator and the control valve in the automatic control system.
-
11
Sep, 2021
The actuator is an essential part of the automatic control system. Its function is to accept the control signal sent by the controller and change the size of the controlled medium, so as to maintai...
-
10
Sep, 2021
According to the IEEE 802.3 protocol, the function of the hub is to randomly select a port device and let it monopolize the entire bandwidth to communicate with the uplink device (switch, router or...
-
09
Sep, 2021
The external board structure of ordinary hubs is very simple. For example, D-Link's simplest 10BASE~T EthernetHub hub is a rectangular parallelepiped, with AC power sockets and switches, an AUI int...