Working Theory BOT-R6X

BOT-R6X series Wifi Combi Boiler Thermostat is RF wireless thermostat.

The working principle of the BOT-R6X thermostat and receiver is as follows:

Temperature sensoring: The wireless wall-mounted boiler thermostat has a built-in temperature sensor to measure the indoor temperature. When the user sets the target temperature, the thermostat compares the actual temperature measured by the sensor with the set target temperature.

Signal transmission: When the thermostat needs to adjust the working status of the wall-mounted boiler, it sends the control instruction to the receiver through a wireless signal. The receiver is usually installed near the wall-mounted boiler to receive the wireless signal from the thermostat.

Receiver controls the wall-mounted boiler: After the receiver receives the wireless signal from the thermostat, it will parse the instruction and control the working status of the wall-mounted boiler. According to the instructions sent by the thermostat, the receiver can start, stop, adjust the firepower, etc. of the wall-mounted boiler to achieve the set target temperature.

Feedback information: The receiver usually also feeds back the working status information of the wall-mounted boiler to the thermostat so that the thermostat can monitor the operation of the wall-mounted boiler in real time. In this way, users can understand the working status of the wall-mounted boiler and the indoor temperature at any time.

User operation: Users can set the target temperature, adjust the temperature curve, set the timer on/off, etc. through the thermostat interface or mobile phone App. The thermostat will send the user's operation instructions to the receiver through wireless signals to realize intelligent control of the wall-mounted boiler heating system.

In general, the wireless wall-mounted boiler thermostat and the receiver communicate through wireless signals to realize remote control and monitoring of the wall-mounted boiler heating system. The thermostat measures the indoor temperature and sends control instructions. The receiver receives and executes the instructions to control the working status of the wall-mounted boiler, and at the same time feeds back information to the thermostat to realize intelligent temperature control management. In this way, users can realize functions such as remote control, intelligent adjustment and timing control, and improve the efficiency and comfort of the heating system.